Installation

Filter Products

Showing 271–300 of 539 results

• 

  • Sizes: 5L, 20L
  • Coverage: 0.1-0.2 kg/m2
  • Solvent free, acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC) for absorbent and non-absorbent substrates also with residual of old adhesives. Suitable also as adhesion promoter for levelling compounds onto substrates treated with epoxy or polyurethane primers.
  Cementitious Materials

  Mapei Eco Prim T Plus

  Code: EPT

  Select options
• 

  • Size: 2Kg, 10kg
  • Coverage: 1.35Kg/m3
  • Two-component, solvent free epoxy adhesive for monolithic sealing cracked screeds. 60 minutes of workability time and 5 hours of open time.
  Cementitious Materials

  Mapei Eporip

  Code: MER

  Select options
• 

  • Size: 20Kg
  • Coverage: 3.5-4.5kg/m2 per cm of thickness
  • Special binder for quick-setting and drying (24 hours), controlled shrinkage screeds. Mix one 20kg bag with 80-100 kg of 0-8mm graded aggregate. Add 4-8 kg of water according to moisture in the aggregate
  Cementitious Materials

  Mapei Mapecem

  Code: MAC20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Coverage: 1m2 at 10mm
  • Pre-blended, mortar for ready-to-use, quick setting and drying (24 hours), controlled shrinkage screeds. Mix 1 x 20kg bag of Mapecem Pronto with approximately 1.5-1.7 litres of water.
  • Workability time of 20-30 minutes and light foot traffic after 2-3 hours. Ready for resilient and timber flooring installation after 24 hours
  Cementitious Materials

  Mapei Mapecem Pronto

  Code: MAP20
  Add to list

  Product added
• 

  • Size: 11.3Kg, 22.7Kg
  • Coverage: 1.6Kg/m2 per mm of thickness
  • Fast setting smoothing patching compound for both interior and exterior applications. Ideal for use in elevation changes including ramping.
  • Natural grey to blend in with existing concrete. Can be primed and covered with a levelling compound after minimum 2 hours.
  Cementitious Materials

  Mapei Mapecem QuickPatch

  Code: MAQ

  Select options
• 

  • Size: 20Kg
  • 1.5Kg/m2 per mm of thickness
  • Waterproofing for indoor floor and water surfaces that are not continuously immersed in water or subject to rising damp. Flexible, anti-fracture membrane.
  • Apply before the installation of ceramic tiles or stone material. MapeGum WPS is a ready-to-use, solvent-free, one-component, grey-coloured paste with a base of synthetic resins in water dispersion
  Cementitious Materials

  Mapei MapeGum WPS

  Code: MG20
  Add to list

  Product added
• 

  • Size: 15Kg
  • 1.3Kg/m2 per mm of thickness
  • Ready to use, ultraquick drying, flexible liquid membrane for internal and external waterproofing applications.
  • The flexible nature of Mapelastic AquaDefense helps to withstand normal movements caused by expansion and shrinkage of the substrate due to temperature variations and vibration
  Cementitious Materials

  Mapei Mapelastic AquaDefense

  Code: MA15
  Add to list

  Product added
• 

  • Size: 10Kg
  • Coverage: 100m2
  • 1 coat system
  • Moisture vapour barrier for cement-based substrates that are not subject to rising damp, but have a relative humidity content higher than the Australian Standard up to 95% RH (ASTM F2170 as per AS 1884:2012)
  Cementitious Materials

  Mapei MapeProof 1K Turbo

  Code: MPT10
  Add to list

  Product added
• 

  • Size: 10Kg
  • Coverage: 40m2
  • 2 coat system, 15 minute recoat time, 2-24hr levelling window
  • 95% RH
  • One-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 cm-% (95% R.H)
  Cementitious Materials

  Mapei Mapeproof Primer

  Code: MP10
  Add to list

  Product added
• 

  • Sizes: 5kg, 20kg
  • Max Thickness: 1-20mm
  • Coverage: 1.6kg/m2 per mm of thickness
  • Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20mm, including on vertical surfaces. Suitable for local repairs.
  Cementitious Materials

  Mapei Nivorapid

  Code: NR

  Select options
• 

  • Size: 20Kg
  • Max Thickness: 1mm-10mm
  • Coverage: 1m2 at 12mm
  • Fast hardening levelling and smoothing compound used in interiors on new and existing substrates prior to the installation of carpet, vinyl or ceramics where resistance to heavy loads and traffic is required.
  • For use on concrete slabs and cement-based screeds, existing ceramic tiles, terrazzo and natural stone floors. Strong enough to withstand wheel traffic and can be applied in thicknesses up to 10mm per single coat.
  Cementitious Materials

  Mapei Novoplan 21

  Code: NO20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Coverage: 1.7Kg/m2 per mm of thickness
  • Rapid-drying, moisture-resistant, self-levelling smoothing mortar for layers 1mm to 10mm thick.
  • Also suitable for internal smoothing substrates before bonding non-welded resilient floor tiles with reactive adhesives in areas that need to be washed or rinsed frequently; smoothing over concrete substrates with rising damp before placing PVC isolating sheets.
  Cementitious Materials

  Mapei Planex HR

  Code: PHR20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Coverage: 1.7Kg/m2 per mm of thickness
  • Rapid-drying, moisture-resistant, self-levelling smoothing mortar for layers 2mm to 20mm thick.
  • Also suitable for internal smoothing substrates before bonding, non-welded resilient floor tiles with reactive adhesives in areas that need to be washed or rinsed frequently; smoothing over concrete substrates with rising damp before placing PVC isolating sheets.
  Cementitious Materials

  Mapei Planex HR Maxi

  Code: PHRM20
  Add to list

  Product added
• 

  • Size: 25Kg
  • Synthetic rubber latex to improve adhesion and performances of cement mixes and prepare bonding slurries for screeds. Consumption rates for adhesive slurry are 100-150g/m2 and to prepare screeds and render: 50-80 kg/m3
  Cementitious Materials

  Mapei Planicrete SP

  Code: PSP25
  Add to list

  Product added
• 

  • Size: 4.5kg
  • Max Thickness: Feather Edge to 25mm
  • Coverage: 1.6kg/m2 per mm of thickness
  • High performance polymer-modified, fibre-reinforced cement based skim coating ad patching compound. Ideal to skim coat and smooth minor surface variations and defects on common surfaces. Natural grey colour to blend with existing concrete. 30-60 minute wait time to install floorcoverings.
  Cementitious Materials

  Mapei Planiprep SC

  Code: PP45
  Add to list

  Product added
• 

  • Size: 10L, 20L
  • Consumption: 300-400ml/m2 per coat Two coats required for vapour barrier 100% RH
  • Planiseal MR is an extremely versatile water based epoxy resin compound for use as a primer and protective coating to resist and prevent moisture transmission through mineral substrates. Suitable for applications directly over damp surfaces and freshly installed green concrete, screeds/cementitious toppings.
  • Planiseal MR exhibits excellent positive and negative hydrostatic pressure resistance. Once cured, subsequent waterproofing membranes, adhesives and other finish coats can be applied
  Cementitious Materials

  Mapei Planiseal MR

  Code: PMR

  Select options
• 

  • Size: 4Kg
  • Consumption: 0.2-0.3kg/m2
  • Two-component, solvent-free, 100% solid epoxy primer for consolidating and waterproofing cementitious substrates. Application prior to the installation of flooring sensitive to moisture and to alleviate moisture related problems of concrete or cementitious screeds. Can be applied to substrates up to 100% RH
  Cementitious Materials

  Mapei Primer MF

  Code: MPF4
  Add to list

  Product added
• 

  • Size: 20Kg
  • Coverage: 1m2 at 10mm
  • Ready to use, normal setting, controlled shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. Mix 1 x 20kg bag of Topcem Pronto with approximately 1.4 litres of water. Workability time of 40-60 minutes and light foot traffic after 12 hours.
  • Ready for resilient and timber flooring installation after 4 days
  Cementitious Materials

  Mapei Topcem Pronto

  Code: TPP20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Coverage: 2-2.5kg/m2
  • Bonding slurry prior to the installation of a Topcem Pronto engineered screed. Immediately install the Topcem Pronto screed using the "fresh on fresh" technique
  Cementitious Materials

  Mapei Topcem Pronto Slurry

  Code: TPS20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Max Thickness: 3mm-70mm
  • Coverage: 1m2 at 10mm
  • Fast hardening levelling smoothing compound for thicknesses from 3mm to 70mm. Especially recommended for pumping. Can be used in interiors as bulk filling underlayment compound. Smoothing for underfloor heating systems.
  • When mixed with water, UC Leveller becomes a very fluid, easy to apply mix that has excellent self-levelling properties and cures rapidly. Flooring can be installed after approximately 24-48 hours.
  Cementitious Materials

  Mapei UC Leveller

  Code: UCL20
  Add to list

  Product added
• 

  • Size: 20Kg
  • Max Thickness: 10mm-100mm
  • Coverage: 1m2 at 10mm
  • Fast hardening levelling smoothing compound for thicknesses from 10mm to 100mm. Especially recommended for pumping. Used in interiors as a bulk-filling underlayment compound. Smoothing for underfloor heating systems
  • When mixed with water, UC Leveller Maxi becomes a very fluid, easy to apply mix that has excellent self-levelling properties and cures rapidly. Flooring can be installed after approximately 24-72 hours
  Bulk Fill

  Mapei UC Leveller Maxi

  Code: UCM20
  Add to list

  Product added
• 

  • Size: 14kg
  • Coverage: Up to 56m2 with V1 (4m2/kg)
  • Very easy to apply, very long open time and excellent residual tack
  • Not flammable
  Vinyl

  Mapei Ultrabond Eco 380

  Code: E38014
  Add to list

  Product added
• 

  • Size: 5kg
  • Spread Rate: 150-200g/m2
  • Solvent free contact adhesive for resilient and textile floor and wall coverings. Suitable for bonding covings, fillets, steps and corner pieces
  Contact - Non-Solvent Based

  Mapei Ultrabond Eco Contact

  Code: UEC5
  Add to list

  Product added
• 

  • Size: 7kg
  • Spread Rate: 250-350 g/m2
  • Suitable for bonding LVT, SPC and rigid LVT tiles and planks
  • Particularly suitable for laying LVT in wet areas even on non absorbent substrates
  Water Resistant

  Mapei Ultrabond Eco MS 4 LVT Wall

  Code: UMS4
  Add to list

  Product added
• 

  • Size: 600ml Sausage & 15kg Drum
  • Spread Rate: 18m2
  • Solvent free, ready to use silylated polymer-based adhesive
  • Used for bonding pre-finished wooden floors, lamparquet, slats, floorboards and all types of parquet on: cementitious screeds
  Timber

  Mapei Ultrabond Eco S955

  Code: US

  Select options
• 

  • Size: 14kg
  • Spread Rate: Upto 75m2 with V1 (5m2/L)
  • Suitable as wet bed adhesive on level & absorbent surfaces & underfloor heating systems
  • Also suitable as transitional pressure sensitive adhesive for bonding dimensionally stable floorcoverings on impervious, non-absorbent surfaces
  Universal

  Mapei Ultrabond Eco V4 Evolution

  Code: UV4E
  Add to list

  Product added
• 

  • Size: 14kg
  • Suitable as wet-bed adhesive on level self-absorbent surfaces and underfloor heating systems
  • Ideal for bonding acoustic matting before the installation of pre- finished engineered timber flooring
  Timber

  Mapei Ultrabond Eco V4SP

  Code: UV4SP
  Add to list

  Product added
• 

  • Size: 16kg
  • Acrylic adhesive with conductive fibres
  • For use with Conductive Vinyl, rubber, Linoleum and textile floorcoverings
  Vinyl

  Mapei Ultrabond Eco V4SP Conductive

  Code: UV4SPC
  Add to list

  Product added
• 

  • Size: 14Kg
  • Spread Rate: Upto 75m2 with V1 (5m2/L)
  • Suitable on level and absorbent surfaces and underfloor heating systems
  Universal

  Mapei Ultrabond Eco VS90 Plus

  Code: UVS90
  Add to list

  Product added
• 

  • Size: 600ml Sausage & 15kg drums
  • Spread Rate: 18m2
  • Solvent free, ready to use elastic polyurethane adhesive
  • Suitable for heated floos
  Timber

  Mapei Ultrabond P990 1K

  Code: P990

  Select options